Successful Case

div class="tab-pane fade show active" id="success-case01" role="tabpanel" aria-labelledby="success-case01-tab">

Networking Products

The customer needs a thermal solution,and below is the place of control chip and heat source.

Customer requirements

At the ambient temperature of 40℃,the temperature of control chip(heat source) should not be more than 90℃,and the temperature of shell should not be more than 65℃.
Note:
Measurement points are marked as below. 1/2/3/4/5/6 are the measurement points of PCB components,7/8/9 are the measurement points of shell(bottom), and 10/11/12 are the measurement points of shell(top).


Thermal solution and tests

Result


Below is the data of temperature and result.

Conclusion: Below is the data of temperature,and the result proves that Asink solid nano-carbon can satisfy the customer's need.